|
 Camera Mounting Accessories
OptoTherm camera
mounting accessories provide a variety of ways to mount and position your
thermal imaging camera. All mounting accessories have a standard
1/4"-20 mounting screw that fits most thermal imaging cameras.
Camera Positioning Arm with Universal Mount
 The camera
positioning arm allows the camera to be quickly placed at any position
within the arms range. The arm can be positioned within a 28 radius
from mount and at a height of 2-24 using one extender tube
(8-30 height using two extender tubes).
The
camera can be positioned directly downward or it can be rotated on the
bracket to enable sideways or upward viewing.
The universal
mount at the base of the arm can be mounted in the following configurations:
-
Desk edge
clamp mount
-
Through desk
mount
-
Wall mount
Camera Stands
 The standard and
large camera stands allow you to adjust the vertical position of the camera
and lock it in place. They also provide a stable platform on which to place
or mount the unit under test. The platform is a wood composite and can be
easily machined to mount custom fixtures.
 A metric scale
on the vertical post of each stand allows you to accurately position the
camera to a previously recorded height in order to perform repeatable
tests. The camera may be rotated on the camera mounting pad to enable
sideways or angular operation.
The standard
camera stand is 27.5 tall and has a platform that is 16.5x15.5x1.125
thick. The large camera stand is 44 tall and has a platform that is
27x24x1.125 thick.
Focus and Pan
Stage
 This rack and pinion
stage mounts between the camera and camera mounting device (stand, tripod,
positioning arm). It enables the camera to be precisely positioned in the x
(30 mm travel), y (35mm travel), and z (32 mm travel) directions. It is
particularly useful when using the 35° (H)x50°(V)
lens at close focus distances to zoom in on small targets.
Heavy Duty Tripod
 Engineered for use with thermal
imaging cameras, this heavy-duty tripod features a deluxe fluid two-way
panhead with a versatile handle design. The sure-grip control handle
can be set in any one of four positions for maximum control. This
tripod has an auto lock system
with a camera-safe side-mount quick-release platform and a retractable
camera alignment pin for convenient tripod setup.
The radial leg braces allow for
maximum stability, while the three-section 27- millimeter tubular aluminum
legs contribute to overall sturdiness. The legs also feature quick
side-lever leg locks for easy leg adjustments, steel ground spikes with
adjustable rubber tips for no-slip setups, and a titanium bronze-and-black
finish. The maximum extended height is approximately 5.5 feet.
back to top
|
sales@optotherm.com